| 配方類型： |
POLISH |
| 配方說明： |
Silicone Car Wash and Polish (Aerosol) |
| 配方組成： |
Distilled Water/32
Weigh or measure the materials in an appropriate vessel with mild
agitation (half an hour should be sufficient) until complete uniformity
is obtained.
Step 3:
This step may be performed in the aerosol container itself. Only very
mild agitation is required to obtain uniform dispersio
"Armac" T Emulsifier/10
Emulsion B/1
Distilled Water/4
Distilled Water/80
"Crown" 23 Wax/10
Emulsion A/40
"Union Carbide" LE-462 Silicone/8
|
| 配制方法： |
Packaging Instructions: The formula of step 3, four parts distilled water and one part emulsion B, should be pressurized with 5% (by weight) propellent in a seamless lacquered tin-plate can with a standard Clayton foam valve. The propellent used may be either "UCON" Propellent 114/12 at a ratio of 3/2 or "UCON" hydrocarbon propellent. Corrosion studies should be run on the final formula before large-scale production is started. |
