| 配方類型： |
COATINGS |
| 配方說明： |
Asphalt Emulsion Roof Coating |
| 配方組成： |
*The dry-fluff form is cited here; however, the wet-fluff form is
Attagel 40/3.0
Start agitationn; mix well and add
Carbon Black Soln./0.4
Emulsion Stabilizer/optional
Inert Fillers (CaCO3, talc, slate, bentonite, etc.)/32.6
sufficient to produce uniform dispersion at lower cost. Use 2% Pulpex
E-DV wet-fluff, as is, since E-DV is nominally 50% total solids.
Pulpex E-DH*/1.0
Asphalt Emulsion (60% total solids; anionic SS1H type)/32.0
Water/31.0 |
| 配制方法： |
In handling asphalt emulsions, care should be exercised in the order of addition and temperature at which finished product is applied-not to exceed 100 F. Up to 25% additional water may be used for dilution when applied. Prior dilution may cause settling of fillers. |
|
